Product ID:BUTYL FLEX CAULK
MSDS Date:09/29/1988
FSC:8030
NIIN:00N012569
MSDS Number: BQPJB

DAP INC

5300 HUBERVILLE RD
DAYTON, OH 45401-0277
US

Emergency Phone: 800-543-3840 800-535-5053

Info Phone: 800-513-3810

Cage: 90300

DAP INC.

277 DAYTON, OH 45401-0277 US

Telephone: 513-253-7154/800-543-3840

Cage: 90300

MINERAL SPIRITS

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 5-10%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

SOLVENT NAPHTHA (PETROLEUM),LIGHT ALIPHATIC.VAPOR

CAS: 64742-89-8

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

TRADE SECRET COMPONENTS.

OSHA PEL N/K

ACGIH TLV: N/K

VOC LESS WATER LESS EXEMPT

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOCIATED PROLONGED AND
REPEATED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN
AND NERVOUS SYSTEM DAMAGE.HARMFUL OR FATAL IF
SWALLOWED.CONCENTRATING AND INHALING VAPORS MAY BE HARMFUL OR
FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:MAY IRRITATE.SKIN:MAY
IRRITATE.INGESTION:HARMFUL OR FATAL IF SWALLOWED.CAUSES
VOMITING,DIARRHEA,AND DEPRESSED RESPIRATION.INHALATION:HARMFUL IF
INHALED.MAY IRRITATE NOSE AND RESPIRATORY TRACT.MAY AFFECT THE
BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS,HEADACHE OR NAUSEA.
Medical Cond Aggravated by Exposure:NONE KNOWN

First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES.CONTACT A PHYSICIAN IMMEDIATELY.SKIN:WASH IMMEDIATELY WITH
SOAP AND WATER.INGESTION:DO NOT INDUCE VOMITING.CONTACT A PHYSICIAN
OR REGIONA L POISON CONTROL CENTER IMMEDIATELY.INHALATION:REMOVE TO
FRESH AIR.CONTACT A PHYSICIAN IMMEDIATELY.

Flash Point Method:TCC
Flash Point:58F,14.44C
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CONTR MAY EXPLODE IF EXPOS TO EXTREME
HEAT.ELIM SOURCES OF IGNIT:HEAT,ELEC EQUIP,SPK & OPEN FLAMES.DO NOT
PUT IN CONT W/ OXIDIZING/CAUSTIC MATL.(SEE SUPP)

Spill Release Procedures:USE ABSORBENT MATERIAL OR SCRAPE UP DRIED
MATERIAL AND PLACE INTO CONTAINERS.
Neutralizing Agent:N/K

Handling and Storage Precautions:KEEP CONTR FROM EXCESSIVE
HEAT,FREEZING & TIGHTLY CLSD WHEN NOT IN USE.DO NOT STORE @ TEMP
ABOVE 120F,48.89C.STORE AWAY FROM CAUSTICS AND OXIDIZERS.
Other Precautions:KEEP OUT OF THE REACH OF CHILDREN.

Respiratory Protection:IF 8-HOUR EXPOSURE LIMIT/VALUE IS EXCEEDED FOR
ANY COMPONENT,USE AN APPROVED NIOSH/MSHA RESPIRATOR.CONSULT YOUR
SAFETY EQUIPMENT SUPPLIER AND THE OSHA REGULATION,29 CFR 1910.134
FOR RESPIRATOR REQUIRE MENTS.
Ventilation:PROVIDE SUFFICIENT MECHANICAL VENTILATION (LOCAL/GENERAL
EXHAUST) TO MAINTAIN EXPOS BELOW PEL & TLV.VAPORS ARE (SEE SUP)
Protective Gloves:SOLVENT IMPERVIOUS GLOVES.
Eye Protection:GOGGLES/SAFETY GLASSES WITH EYE SHIELDS.
Other Protective Equipment:PROVIDE EYEWASH AND SOLVENT IMPERVIOUS APRON
IF BODY CONTACT WITH PRODUCT OCCURS.BARRIER CREAMS MAY BE USED.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPLO HAZ:HAZ DECOMP PROD:NORMAL COMBUSTION PRODUCTS (SUCH AS OXIDES OF
CARBON,OXIDES OF NITROGEN).RTE OF ENTRY:SKIN/INGESTION .VENT:ARE
HEAVIER THAN AIR AND WILL COLLECT IN LOW AREAS.CHECK ALL LOW AREAS
(BASEMENTS,SUMPS) FOR VAPOR BEFORE ENTERING.

HCC:F3
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>1 (AIR=1)
Spec Gravity:1.46 (WATER=1)
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE PASTE WITH A PETROLEUM DISTILLATE ODOR.
Percent Volatiles by Volume:10-20

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS.
Stability Condition to Avoid:STABLE AT ROOM TEMP.AVOID EXCESSIVE HEAT.
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS,SUCH AS
OXIDES OF CARBON,OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DISCARDED MATERIAL SHOULD BE
INCINERATED AT A PERMITTED FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.